Battery Diode Splitters
ARGO diode splitters are used to charge 2 or 3 battery banks from a single charge source.
The battery with the lowest voltage automatically receives most of the charge current while the diodes prevent one battery draining into the other.
Low voltage drop due to the use of Schottky diodes. A compensation diode is provided to connect to the voltage sense of the charging source.
|
|
Applications
- Charge multiple banks from one source
- House, start, radio battery charging
- Twin engine start bank charging
| Diode | Schottky |
| Compensation diode | Yes |
| Voltage drop at low I | 0.3V |
| Voltage drop at I rated | 0.45V |
PRODUCTS
| Outputs | Imax | Alternator | Dimensions | Weight | |||
|---|---|---|---|---|---|---|---|
| ARG070201000 Victron Argo 702SC |
2 | 50 A | 70 A | 60x120x80 mm | 0.8 kg | ||
| ARG090301000 Victron Argo 903SC |
3 | 70 A | 90 A | 60x120x150 mm | 1.2 kg | ||
| ARG120201000 Victron Argo 1202SC |
2 | 100 A | 120 A | 60x120x100 mm | 1.2 kg | ||
| ARG120301000 Victron Argo 1203SC |
3 | 100 A | 120 A | 60x120x150 mm | 1.2 kg | ||
| ARG160201000 Victron Argo 1602SC |
2 | 130 A | 160 A | 60x120x150 mm | 1.2 kg | ||
| ARG160301000 Victron Argo 1603SC |
3 | 130 A | 160 A | 60x120x200 mm | 1.5 kg |